Setting CLI pada Router Cisco Packet Tracer

  --- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: no

Press RETURN to get started!

Router>en

Router#confi

Router#configure ter

Router#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname Router_TriBagusSoleman

Router_TriBagusSoleman(config)#in

Router_TriBagusSoleman(config)#interface fa

Router_TriBagusSoleman(config)#interface fastEthernet 0/1

Router_TriBagusSoleman(config-if)#ip a

Router_TriBagusSoleman(config-if)#ip add

Router_TriBagusSoleman(config-if)#ip address 192.180.10.100 255.255.255.0

Router_TriBagusSoleman(config-if)#no

Router_TriBagusSoleman(config-if)#no sh

Router_TriBagusSoleman(config-if)#no shutdown

Router_TriBagusSoleman(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router_TriBagusSoleman(config-if)#exit

Router_TriBagusSoleman(config)#exit

Router_TriBagusSoleman#write

Router_TriBagusSoleman#write m

Router_TriBagusSoleman#write memory

Building configuration...

[OK]

Router_TriBagusSoleman#